![materials](https://i.washerhouse.com/images/10/999-materialv.jpg)
Let's prepare our cardboard, that is, we will free the covers from all unnecessary layers. The size can be any. The main thing is to cut the correct internal window. We will make it on one of the cardboards. The easiest way is to attach and circle the photo in the center. Then add 5 millimeters to the inside of the frame and cut a hole. We don’t throw away the inner cut out part, it will serve as a leg.
![cut out](https://i.washerhouse.com/images/10/1000-vyrezaem.jpg)
![cut out](https://i.washerhouse.com/images/10/1001-vyrezaem.jpg)
![soft photo frame](https://i.washerhouse.com/images/10/1002-myagkaya-ramka-dlya-fotografiy.jpg)
The second cardboard and the future leg need to be covered with our paper or wallpaper using PVA glue.On one side, the wall must be glued with an overlap in order for our outer sides to look neat.
![soft photo frame](https://i.washerhouse.com/images/10/1003-myagkaya-ramka-dlya-fotografiy.jpg)
![soft photo frame](https://i.washerhouse.com/images/10/1004-myagkaya-ramka-dlya-fotografiy.jpg)
While our back wall is drying, let's start decorating the front side. To do this, you need to glue pieces of padding polyester to the frame and let them dry. Try the frame on the fabric and cut out the desired size. We place the frame with the padding polyester down on the fabric, fold the edges and, stretching, glue it around the perimeter. The corners need to be glued especially carefully so that they do not puff up on the front side.
![soft photo frame](https://i.washerhouse.com/images/10/1005-myagkaya-ramka-dlya-fotografiy.jpg)
Next, we make an X-shaped cut in the center and glue the corners carefully back.
![soft photo frame](https://i.washerhouse.com/images/10/1006-myagkaya-ramka-dlya-fotografiy.jpg)
![soft photo frame](https://i.washerhouse.com/images/10/1007-myagkaya-ramka-dlya-fotografiy.jpg)
![soft photo frame](https://i.washerhouse.com/images/10/1008-myagkaya-ramka-dlya-fotografiy.jpg)
Our frame is almost ready, all that remains is to attach the leg to the back. It is better to do this with quick-drying glue. After it dries, we connect the two halves together, gluing all sides except the top side. Through this hole we will insert a photograph into it.
![soft photo frame](https://i.washerhouse.com/images/10/1009-myagkaya-ramka-dlya-fotografiy.jpg)
![soft photo frame](https://i.washerhouse.com/images/10/1010-myagkaya-ramka-dlya-fotografiy.jpg)
You can decorate the frame with ribbons, beads or bows, at your discretion.