![Love tree](https://i.washerhouse.com/_nw/10/904-1.jpg)
At this stage, we will need red wire and beads, and we will put the white color aside for now. So, cut off 15 cm of red wire and put 5 red beads on it. Move them to the middle and twist them as shown in the picture.
![](https://i.washerhouse.com/_nw/10/904-2.jpg)
Now we again put 5 beads on one end of the wire and twist it.
![](https://i.washerhouse.com/_nw/10/904-3.jpg)
We put 5 beads on again, only now on the other end of the wire and twist them.
![](https://i.washerhouse.com/_nw/10/904-4.jpg)
We repeat all this until our branch has 4 petals on each side. We will need 15 of these.
![](https://i.washerhouse.com/_nw/10/904-5.jpg)
Working according to the same scheme, we make 32 more things, only they should not have 4 petals, but 3.
![](https://i.washerhouse.com/_nw/10/904-6.jpg)
For one branch we need 3 large branches and 6 small ones.
![](https://i.washerhouse.com/_nw/10/904-7.jpg)
Now take white beads and white wire. We should have 32 small branches and 15 large ones. In the end it will be like this:
![](https://i.washerhouse.com/_nw/10/904-8.jpg)
It's time to start forming the main 5 branches. Here's what we'll need:
![](https://i.washerhouse.com/_nw/10/904-9.jpg)
To make our branch plump, cut about 50 pieces of 10-centimeter wire. Take a wire 0.4 ml thick. Let's start forming the branch. We take a twig that has 4 petals and wrap a piece of wire to it with floss threads.
![](https://i.washerhouse.com/_nw/10/904-10.jpg)
Now we take a branch that has 3 petals and wrap it to the main branch. We attach a piece of wire and wrap it. The distance should be small, approximately as shown in the figure.
![](https://i.washerhouse.com/_nw/10/904-11.jpg)
Do not forget to thicken the main branch with pieces of wire after every 2 branches. Add branches that have 3 petals. On each side you should get 4 branches of 3 petals. The last fifth branch is taken from 4 petals. This is the big branch you should get.
![](https://i.washerhouse.com/_nw/10/904-12.jpg)
But we will have only one such large branch, we will make the remaining 4 branches without 1 branch (on each side) from three petals. But the last branch must have 4 petals. We will have 5 branches, with the largest branch in the center. We repeat everything with white branches.
![](https://i.washerhouse.com/_nw/10/904-13.jpg)
Take the largest branch and tie a branch to it
![](https://i.washerhouse.com/_nw/10/904-14.jpg)
We wrap each branch at a distance of approximately 3-4 centimeters. We do the same with white branches. It will turn out like this.
![](https://i.washerhouse.com/_nw/10/904-15.jpg)
Straighten the branches and secure them with wire. But I did it a little differently. I took plaster of Paris and coated the branches with it. I also made a stand for our tree from plaster. I painted the finished composition with simple paints and decorated it a little with flowers, which I also made from beads.
This is such a beauty I got!!!
![](https://i.washerhouse.com/_nw/10/904-16.jpg)
![](https://i.washerhouse.com/_nw/10/904-17.jpg)