HI ALL!!!
I want to share with you how I made the backlight CD-ROMA. What we need: second glue, soldering accessories, wires, LEDs.
![](https://i.washerhouse.com/_nw/3/19847911.jpg)
![](https://i.washerhouse.com/_nw/3/89236497.jpg)
LEDs I cut it out from the backlight of the mobile phone, that is, its keyboard.
![](https://i.washerhouse.com/_nw/3/72028827.jpg)
The first step is to install LEDs into the holes in the tray like I did. fill it with glue and bring the wires out from them to the back of the tray.
![](https://i.washerhouse.com/_nw/3/36203590.jpg)
At the ends of these wires, thin conductive plates (thin copper plate) are soldered, these plates (contact) are glued to the tray, as in the photo.
![](https://i.washerhouse.com/_nw/3/63792602.jpg)
At the second stage, you need to glue the spring-loaded contacts to the CD-ROMA case (under no circumstances should they be connected to metal, otherwise it will short out!) We take the wires from them out of the CD-ROMA itself. They connect to 5 and 12 volts on the computer chip (shown in the photo).
![](https://i.washerhouse.com/_nw/3/34307536.jpg)
That seems to be all, if you don’t understand anything, call me on Skype serg41836
THANKS TO ALL!!!