![materials](https://i.washerhouse.com/images/9/793-materialy.jpg)
Print out the owl pattern in two copies on an A3 sheet.
![Print out the owl pattern](https://i.washerhouse.com/images/9/794-raspechatayte-vykroyku-sovy.jpg)
Cut out all the pattern pieces from the fabric according to the designations. In this case, cut out the parts of the body from checkered fabric.
![cut out the body parts](https://i.washerhouse.com/images/9/795-vyrezhte-detali-tulovischa.jpg)
Cut out the details of the wings from red and checkered cotton, and cut out the details of the pockets from white and red fabric with small polka dots.
![cut out the wing parts](https://i.washerhouse.com/images/9/796-vyrezhte-detali-krylev.jpg)
![cut out the wing parts](https://i.washerhouse.com/images/9/797-vyrezhte-detali-krylev.jpg)
![cut out the pocket pieces](https://i.washerhouse.com/images/9/798-vyrezhte-detali-karmanov.jpg)
Cut out the paw pieces from the red polka dot fabric.
![cut out the paw pieces](https://i.washerhouse.com/images/9/799-vyrezhte-detali-lapok.jpg)
Cut out the eyes and beak from felt. Reinforce all cotton parts on the wrong side with non-woven fabric.
![strengthen the parts](https://i.washerhouse.com/images/9/800-detali-ukrepite.jpg)
This step can be neglected if thick fabric is used. Prepare your pocket. To do this, fold both of its parts with the pattern inward and lay a straight line along one of the long sides.
![fold](https://i.washerhouse.com/images/9/801-slozhite.jpg)
Turn the piece inside out and iron it, and then re-stitch the decorative stitch.
![add decorative stitching](https://i.washerhouse.com/images/9/802-prolozhite-dekorativnuyu-strochku.jpg)
Place one of the body parts on the work surface, wrong side down. Place a pocket on it.
![pack your pocket](https://i.washerhouse.com/images/9/803-ulozhite-karman.jpg)
At intervals of 7-10 cm, lay straight lines perpendicular to the fold lines, thereby connecting the pocket with the body part and creating dividers for the remote control and phone. Using a zig-zag stitch, sew on the eyes, eyelids and beak of the owl.
![eyelids and beak of an owl](https://i.washerhouse.com/images/9/804-veki-i-klyuv-sovy.jpg)
Now take the wing parts. Lay them out on the work surface with the pattern facing inward, place the ironed padding polyester on top and lay a straight line around the perimeter of the wing, excluding only its base.
![Lay out](https://i.washerhouse.com/images/9/805-razlozhite.jpg)
Cut off the excess Snitpon along the stitching, turn it inside out and iron the wing. Now, to fix the padding polyester and give the wing additional rigidity, lay a straight or decorative stitch along the perimeter of the wing, departing 3 millimeters from the fold line.
![decorative stitching around the perimeter of the wing](https://i.washerhouse.com/images/9/806-dekorativnuyu-strochku-po-perimetru-kryla.jpg)
Assemble the second wing in the same way. Secure the wings to the main piece with tailor's pins.
![Fasten the wings](https://i.washerhouse.com/images/9/807-zakrepite-krylya.jpg)
Place the parts of the legs with their right sides facing each other, lay a straight stitch along their perimeter, leaving a 5 cm wide hole for turning inside out.
![eversion](https://i.washerhouse.com/images/9/808-vyvorachivaniya.jpg)
Turn out and iron the legs, and then stuff them with padding polyester and baste them to the main part.
![baste to the main part](https://i.washerhouse.com/images/9/809-primetayte-k-osnovnoy-detali.jpg)
Cover the product with the second part of the body and lay a straight stitch around the perimeter, leaving a hole between the legs for turning.
![eversion hole](https://i.washerhouse.com/images/9/810-otverstie-dlya-vyvorachivaniya.jpg)
Turn out and steam the workpiece. All that remains is to stuff the owl with padding polyester and close the hole with a hidden seam. Your DIY owl pillow is ready!
![sew an owl pillow with a pocket](https://i.washerhouse.com/images/9/811-shem-podushku-sovu-s-karmanom.jpg)
![sew an owl pillow with a pocket](https://i.washerhouse.com/images/9/812-shem-podushku-sovu-s-karmanom.jpg)