To make a flower hairpin we need:
• A small piece of fabric (wool is best)
• Needle
• A thread
• Beads (for the flower core)
• Regular hairpin
• Glue
• Scissors
First of all, we cut out 2 pieces from the taken fabric so that they are slightly larger in area than the hairpin itself.
![cut from taken fabric](https://i.washerhouse.com/images/7/401-vyrezaem-iz-vzyatoy-tkani.jpg)
Now fold one piece of fabric in half.
![fold one piece](https://i.washerhouse.com/images/7/402-skladyvaem-odin-kusok.jpg)
Make a small cut at the top.
![Making a small cut](https://i.washerhouse.com/images/7/403-delaem-malenkiy-nadrez.jpg)
We insert the back of the hairpin into the cut hole. The hairpin must be fastened.
![We push the back part through](https://i.washerhouse.com/images/7/404-prosovyvaem-zadnyuyu-chast.jpg)
We place a second piece of fabric on the front of the hairpin and sew it to the first. The hairpin should be inside at this moment. We make sure that the stitches are at a minimum distance from the hairpin.
![apply a second piece of fabric](https://i.washerhouse.com/images/7/405-prikladyvaem-vtoroy-kusok-tkani.jpg)
After we have sewn both parts of the fabric, we need to very carefully trim the fabric along the sewn outline. The main thing is not to touch the thread, otherwise the product may fall apart.
![cut the fabric along the stitched outline](https://i.washerhouse.com/images/7/406-obrezat-tkan-po-sshitomu-konturu.jpg)
Now let's start creating the flower. Cut out a petal from the fabric as shown in the photo.
![let's start creating a flower](https://i.washerhouse.com/images/7/407-pristupaem-k-sozdaniyu-cvetka.jpg)
For our flower we need only 5 petals. We insert the thread into the first petal, as shown in the photo, then we thread the remaining petals with the same thread.
![thread the remaining petals](https://i.washerhouse.com/images/7/408-prodevaem-ostalnye-lepestki.jpg)
When you thread all the petals and tighten the thread, you will get a flower like this.
![thread all the petals through](https://i.washerhouse.com/images/7/409-prodenete-vse-lepestki.jpg)
Now you need to secure the flower. To do this, thread the thread through the first and last loop of the stitch, and then tie everything with a knot.
![fasten the flower](https://i.washerhouse.com/images/7/410-zakrepit-cvetok.jpg)
And the last step: glue the core to the flower (if you have a bead with holes, then just sew it on), and sew it on, or also glue the flower onto a hairpin.
![Hairpin with a flower](https://i.washerhouse.com/images/7/411-zakolka-s-cvetkom.jpg)