Onigiri is a Japanese dish made into a triangle of rice and wrapped in a sheet of nori. Such an original keychain in the form of a Japanese dish will appeal to any connoisseur of oriental culture and will interest his surroundings.
![making a plastic keychain](https://i.washerhouse.com/images/5/1240-izgotovlenie-iz-plastika-brelka.jpg)
To make such a “tasty” product, we need to purchase three types of plastic: black, swamp green and white. We’ll also take some foil and a utility knife, which will come in handy when working with plastic.
![making a plastic keychain](https://i.washerhouse.com/images/5/1241-izgotovlenie-iz-plastika-brelka.jpg)
From the accessories we will need:
• metal ring;
• connecting rings (2 pcs.);
• chain 4 cm long.
![making a plastic keychain](https://i.washerhouse.com/images/5/1242-izgotovlenie-iz-plastika-brelka.jpg)
From half of the prepared piece of white plastic we make a triangle.
![making a plastic keychain](https://i.washerhouse.com/images/5/1243-izgotovlenie-iz-plastika-brelka.jpg)
Roll out the remaining half into a sausage with a diameter of 5 mm.
![making a plastic keychain](https://i.washerhouse.com/images/5/1244-izgotovlenie-iz-plastika-brelka.jpg)
We cut the prepared plastic sausage into disks 1-2 mm thick.
![making a plastic keychain](https://i.washerhouse.com/images/5/1245-izgotovlenie-iz-plastika-brelka.jpg)
From the obtained elements we mold grains of rice. There should be a lot of such grains of rice - 60-80 pieces.
![making a plastic keychain](https://i.washerhouse.com/images/5/1246-izgotovlenie-iz-plastika-brelka.jpg)
We randomly stick grains of rice onto the triangle blank from all sides. We pay special attention to the upper part of the workpiece, since the bottom will be partially covered by a sheet of nori.
![making a plastic keychain](https://i.washerhouse.com/images/5/1247-izgotovlenie-iz-plastika-brelka.jpg)
We knead the swamp green and black plastic well, after which we mix these two colors - carefully knead the pieces together until we get a uniform dark green color. Knead and stretch our workpiece with your fingers until a rectangle 1 mm thick is formed.
![making a plastic keychain](https://i.washerhouse.com/images/5/1248-izgotovlenie-iz-plastika-brelka.jpg)
Nori sheet is compressed seaweed into a layer that has an interesting texture. Achieving the formation of a similar texture on our plastic rectangle is our task. We will create a crumpled effect, like a sheet of nori, using foil. We crush it well in our hands, and then press it down on our dark green plastic rectangle. In some places of the workpiece, where the wrinkled foil is poorly imprinted, we repeat the procedure, applying the most wrinkled parts of the foil with patting movements.
![making a plastic keychain](https://i.washerhouse.com/images/5/1249-izgotovlenie-iz-plastika-brelka.jpg)
We cut off the curved edges of the workpiece, forming a regular rectangle.
![making a plastic keychain](https://i.washerhouse.com/images/5/1250-izgotovlenie-iz-plastika-brelka.jpg)
We cover the plastic rice triangle with the obtained element – a plastic sheet of nori. Our miniature onigiri is ready! All that remains is to bake and attach the accessories.
![making a plastic keychain](https://i.washerhouse.com/images/5/1251-izgotovlenie-iz-plastika-brelka.jpg)
We make a hole in the upper part of the onigiri for the connecting ring and send the workpiece to the oven, which was preheated to 110°C. The baking process will take 25 minutes.
After our product has cooled down, we can begin to attach the accessories - first we connect a small ring with a chain, then we thread this connecting ring into the hole made in the upper corner of the onigiri, and then we attach a key ring to the other end of the chain using another ring.
![making a plastic keychain](https://i.washerhouse.com/images/5/1252-izgotovlenie-iz-plastika-brelka.jpg)
The original onigiri keychain is ready, all that remains is to attach it to your keychain!