To make this miracle I used:
![materials](https://i.washerhouse.com/images/4/576-materialy.jpg)
12 matchboxes;
PVA glue;
scrapbooking paper;
plain white A4 paper;
thick cardboard;
beads;
wire;
beads;
satin ribbon 5cm;
acrylic paint;
scissors.
The first step was to carry out all the necessary actions with the boxes. To do this, cut out rectangles from the selected scrap paper that match the size of the short side of the inside of the box.
![cut out rectangles](https://i.washerhouse.com/images/4/577-vyrezaem-pryamougolniki.jpg)
Carefully stick them on the right places.
![stick them in place](https://i.washerhouse.com/images/4/578-nakleivaem-ih-na-mesta.jpg)
Using any sharp object, make a hole in the middle and attach the handle of the future drawer to it.
![make a hole in the middle](https://i.washerhouse.com/images/4/579-prodelyvaem-po-seredine-otverstie.jpg)
This is how I made my pen. I strung one bead onto a small piece of wire, leaving it strictly in the middle.
![wire with bead](https://i.washerhouse.com/images/4/580-provoloka-s-businoy.jpg)
Then, folding the remaining ends of the wire in half, twisted them and pulled them through the bead.
![twist it](https://i.washerhouse.com/images/4/581-zakruchivaem.jpg)
![big bead](https://i.washerhouse.com/images/4/582-bolshuyu-businu.jpg)
Now we drag them through the hole in the box and bend the ends in different directions.
![insert into the hole](https://i.washerhouse.com/images/4/583-vstavlyaem-v-otverstie.jpg)
The outer part is ready. Now you should do the interior design. I used satin ribbon and regular PVA glue. We cut out the following design from a piece of tape.
![cut out the bottom of the box](https://i.washerhouse.com/images/4/584-vyrezaem-dno-korobochki.jpg)
Then, carefully singeing the edges so that the threads do not fall off, we glue it inside the box.
![paste over](https://i.washerhouse.com/images/4/585-okleivaem.jpg)
While the boxes are drying, glue the remaining parts of the matchbox into sections of three.
![glue the boxes](https://i.washerhouse.com/images/4/586-skleivaem-korobki.jpg)
Using a foam sponge and acrylic paint, I tinted the edges of the box, which will be visible when assembled.
![let it dry](https://i.washerhouse.com/images/4/587-daem-vysohnut.jpg)
While all the components of the future masterpiece are drying, you can work on its bottom. To do this, cut out the following figure from cardboard. I have it one centimeter larger than the future base made of boxes.
![box base](https://i.washerhouse.com/images/4/588-osnovanie-iz-korobkov.jpg)
Then, cut out the same square from scrap paper and glue them together.
![cut out a square](https://i.washerhouse.com/images/4/589-vyrezaem-kvadrat.jpg)
We cover the side of the structures where the grater is located with a rectangle of scrap paper.
![glue it with a rectangle](https://i.washerhouse.com/images/4/590-zakleivaem-pryamougolnikom.jpg)
![grater is located](https://i.washerhouse.com/images/4/591-raspolagaetsya-terok.jpg)
Using a piece of plain white paper, we fasten all our boxes together like this.
![fasten it together](https://i.washerhouse.com/images/4/592-skreplyaem-voedino.jpg)
And glue it all to the prepared base.
![glue to the base](https://i.washerhouse.com/images/4/593-prikleivaem-k-osnovaniyu.jpg)
While the lower part of the future chest of drawers for small items is drying well, let’s work on the upper box. To do this, cut out the following design from thick paper.
![cut out of thick paper](https://i.washerhouse.com/images/4/594-iz-plotnoy-bumagi-vyrezaem.jpg)
The square in the middle is equal in size to the box structure. The sheet should be cut along the red lines. Now we wrap all the edges in a box and glue them together.
![glue it together](https://i.washerhouse.com/images/4/595-skleivaem.jpg)
I decided to cover the outer walls of the box with the same scrap paper.
![External walls of the box](https://i.washerhouse.com/images/4/596-vneshnie-stenki-koroba.jpg)
The next step was to make a cover for the outside of the chest of drawers. To do this, we cut out two squares from corrugated cardboard: one is equal to the base, the other is 1 centimeter smaller - equal to the structure itself.
![make a lid](https://i.washerhouse.com/images/4/597-delat-kryshku.jpg)
For the convenience of further decoration, we cover them with plain paper.
![cover with paper](https://i.washerhouse.com/images/4/598-okleivaem-bumagoy.jpg)
Carefully cover the larger one on top of regular paper with scrapbooking paper and glue the squares together like this. (photo24) I decided to decorate the top of my box with a motif.
![cover with scrapbooking paper](https://i.washerhouse.com/images/4/599-okleit-bumagoy-dlya-skrapbukinga.jpg)
Now the whole process is over.
![decorate with motif](https://i.washerhouse.com/images/4/600-ukrasit-motivom.jpg)
One more piece of advice in parting. It is better to make the bottom of such a chest of drawers also from corrugated cardboard. After drying, the bottom of my creation began to ripple, since it was only made of several layers of paper. As a result, you can store small items in drawers, and larger items in the top box.
![Miniature chest of drawers](https://i.washerhouse.com/images/4/601-miniatyurnyy-komod.jpg)
![Miniature chest of drawers open](https://i.washerhouse.com/images/4/602-miniatyurnyy-komod-otkryt.jpg)
![Miniature chest of drawers](https://i.washerhouse.com/images/4/603-miniatyurnyy-komod-shkavchiki.jpg)
![Miniature chest of drawers with accessories](https://i.washerhouse.com/images/4/604-miniatyurnyy-komod-s-prinadlezhnostyami.jpg)
![Miniature chest of drawers with accessories](https://i.washerhouse.com/images/4/605-miniatyurnyy-komod-s-prinadlezhnostyami.jpg)
In addition, such a craft can be an original holiday gift for a creative person.
![Miniature chest of drawers](https://i.washerhouse.com/images/4/606-miniatyurnyy-komod.jpg)