So, today we will make these youth passport covers, and we will need the following materials, accessories and tools:
• Pastel paper the color of wet asphalt, we will need a landscape sheet;
• Two sheets of paper for scrapbooking, take paper measuring 15*15 cm and covered with glitter;
• Two pictures with fashionable girls;
• Two transparent passport covers;
• Beige and light brown grosgrain ribbons, the width of both ribbons is 0.6 cm;
• Beige lace;
• Acrylic “Passport” stamp and two ink pads, one black and the other gold;
• A small piece of watercolor paper or thick cardboard;
• Four metal corners: two silver and two bronze;
• Metal pendant with a girl;
• Peach colored pearl beads;
• Needle with thread;
• Glue gun;
• Ruler;
• Scissors;
• Pencil;
• Sewing machine.
![accessories and tools](https://i.washerhouse.com/images/3/1786-aksessuary-i-instrumenty.jpg)
We attach the unfolded passport to a sheet of pastel paper and, making small margins of 2-3 mm on the sides, cut out two bases for the covers. We get two bases of 12.6 by 18 cm.
![attach your passport](https://i.washerhouse.com/images/3/1787-prikladyvaem-pasport.jpg)
![We get two bases](https://i.washerhouse.com/images/3/1788-poluchaem-dve-osnovy.jpg)
Divide in half and fold.
![Divide in half](https://i.washerhouse.com/images/3/1789-delim-popolam.jpg)
![fold](https://i.washerhouse.com/images/3/1790-skladyvaem.jpg)
Now we prepare the top design of the covers from scrap paper. From each sheet we cut out an 8.5*12 cm rectangle, and from the remaining pieces we also form rectangles so that they also turn out to be 8.5*12 cm. We glue the fragments with double-sided tape. We attach ribbons and lace to the pictures below, cut them off, wrap them and glue them on the back side.
![preparing a design from scrap paper](https://i.washerhouse.com/images/3/1791-iz-skrapbumagi-gotovim-oformlenie.jpg)
![form rectangles](https://i.washerhouse.com/images/3/1792-formiruem-pryamougolniki.jpg)
We stamp “Passport” on the cardboard with black ink, cut out two inscriptions, round the edges and tint them with gold.
![stamp with ink](https://i.washerhouse.com/images/3/1793-chernilami-shtampuem.jpg)
![cut out two inscriptions](https://i.washerhouse.com/images/3/1794-vyrezaem-dve-nadpisi.jpg)
Using a sewing machine, we sew glued rectangles from scrap paper and ribbon and lace to the pictures.
![sew glued rectangles](https://i.washerhouse.com/images/3/1795-prishivaem-skleennye-pryamougolniki.jpg)
![from scrap paper and ribbon](https://i.washerhouse.com/images/3/1796-iz-skrapbumagi-i-lentochki.jpg)
We glue the pictures onto solid blanks and sew each picture in a circle.
![glue onto solid pieces](https://i.washerhouse.com/images/3/1797-prikleivaem-na-celnye-zagotovki.jpg)
![sew in a circle](https://i.washerhouse.com/images/3/1798-prishivaem-po-krugu.jpg)
Using double-sided tape, glue the blanks to the base of the covers.
![Double-sided tape](https://i.washerhouse.com/images/3/1799-dvuhstoronnim-skotchem.jpg)
![glue the blanks](https://i.washerhouse.com/images/3/1800-prikleivaem-zagotovki.jpg)
We sew the front and back covers separately. All that remains is to glue it decor and decorations. Using a glue gun, first glue the metal corners in pairs on each of the covers, then half-beads, sew a metal pendant on one and glue the inscription “Passport” at the bottom.
![We sew the front ones separately](https://i.washerhouse.com/images/3/1801-proshivaem-otdelno-perednie.jpg)
![All that remains is to glue the decor](https://i.washerhouse.com/images/3/1802-ostaetsya-prikleit-dekor.jpg)
The covers are decorated, insert them into transparent ones and you're done! These covers are also very suitable as a gift. Thank you all and good luck in the handicraft process.
![Covers decorated](https://i.washerhouse.com/images/3/1803-oblozhki-ukrasili.jpg)
![Youth passport covers](https://i.washerhouse.com/images/3/1804-molodezhnye-pasportnye-oblozhki.jpg)
![DIY passport covers](https://i.washerhouse.com/images/3/1805-pasportnye-oblozhki-svoimi-rukami.jpg)