![materials](https://i.washerhouse.com/images/6/2350-materialy.jpg)
Cut a rectangle from cardboard 20 cm long and 13.5 cm wide.
![cut out a rectangle](https://i.washerhouse.com/images/6/2351-vyrezhte-pryamougolnik.jpg)
To correctly calculate the size of the rectangle, measure the sides of the passport (in this case 9x12.5 cm). Double the width and add 2 cm to the resulting number (9cmx2+2cm = 20cm). Add 1 cm to the height (12.5 cm + 1 cm = 13.5 cm)
Make a crease along the fold line and two lines on either side of the fold line at 2mm intervals.
![Crease the fold line](https://i.washerhouse.com/images/6/2352-sdelayte-bigovku-linii-sgiba.jpg)
Iron the checkered fabric and cut out a rectangle with sides 2 cm larger than the sides of the cardboard rectangle. In this case, 22x15.5cm.
![Apply a thin layer of glue to the cardboard](https://i.washerhouse.com/images/6/2353-nanesite-na-karton-tonkiy-sloy-kleya.jpg)
Apply a thin layer of PVA glue to the cardboard. Glue the fabric to the cardboard, leaving a hem allowance. Cut the corners of the fabric diagonally.
![Fold and glue](https://i.washerhouse.com/images/6/2354-zagnite-i-prikleyte.jpg)
Fold and glue the top and bottom sides of the fabric to the cardboard coated with PVA glue.
![Fold and glue](https://i.washerhouse.com/images/6/2355-zagnite-i-prikleyte.jpg)
Then the right and left sides.
![Then the right and left sides](https://i.washerhouse.com/images/6/2356-potom-pravuyu-i-levuyu-storony.jpg)
Make sure that the fabric does not overlap at the corners, but lies seam to seam. Excess tissue can be trimmed with nail scissors.
![corner](https://i.washerhouse.com/images/6/2357-ugol.jpg)
From the outside, the corner should also be neat.
![corner](https://i.washerhouse.com/images/6/2358-ugol.jpg)
Cut a rectangle 13 cm long and 5 cm wide from plaid fabric. Fold it 1 cm and iron the short sides of the rectangle inward.
![cut out a rectangle](https://i.washerhouse.com/images/6/2359-vyrezhte-pryamougolnik.jpg)
Glue the fabric to the inside of the cover.
![Glue the fabric to the inside](https://i.washerhouse.com/images/6/2360-prikleyte-tkan-k-vnutrenney-storone.jpg)
Cut two 9x12.5 cm rectangles from scrapbooking paper.
![cut two rectangles](https://i.washerhouse.com/images/6/2361-vyrezhte-dva-pryamougolnika.jpg)
To form pockets from the same paper, cut out two rectangles measuring 5x14.5 cm.
![cut two rectangles](https://i.washerhouse.com/images/6/2362-vyrezhte-dva-pryamougolnika.jpg)
Cut two corners of the long rectangles. To do this, step back 1 cm from the edge of the short and one long side and draw lines. Step back 2 mm from them and draw the parallels that are needed to create a voluminous pocket.
![Cut two corners of long rectangles](https://i.washerhouse.com/images/6/2363-srezhte-dva-ugla-dlinnyh-pryamougolnikov.jpg)
Fold and glue the pockets to the endpapers.
![glue the pockets to the endpapers](https://i.washerhouse.com/images/6/2364-prikleyte-karmashki-k-forzacam.jpg)
For gluing, use a glue stick, which, unlike PVA, does not warp the paper. Glue the paper blanks to the cover. Here already use PVA, but apply it not to paper, but to a cardboard blank.
![Glue the paper blanks to the cover](https://i.washerhouse.com/images/6/2365-prikleyte-bumazhnye-zagotovki-k-oblozhke.jpg)
The final stage is decorating the cover. Cut a rectangle from floral fabric (a), fold it diagonally (b) and round the base of the resulting triangle (c). The result will be a petal.
![cover decoration](https://i.washerhouse.com/images/6/2366-ukrashenie-oblozhki.jpg)
Make 7 more petals. Layering one petal on top of the other, form a flower, periodically stitching through the middle.
![cover decoration](https://i.washerhouse.com/images/6/2367-ukrashenie-oblozhki.jpg)
To complete the flower, sew on a round button and a heart button.
![cover decoration](https://i.washerhouse.com/images/6/2368-ukrashenie-oblozhki.jpg)
Glue the doves and the chain onto polymer glue.
![cover decoration](https://i.washerhouse.com/images/6/2369-ukrashenie-oblozhki.jpg)
![cover decoration](https://i.washerhouse.com/images/6/2370-ukrashenie-oblozhki.jpg)
Then glue lace21.jpg, ribbon and textile flower.
![cover decoration](https://i.washerhouse.com/images/6/2371-ukrashenie-oblozhki.jpg)
Cut an oval out of scrap paper using curly scissors. Print the inscription on purple office paper and cut it out with curly scissors. Glue two pieces together.
![cover decoration](https://i.washerhouse.com/images/6/2372-ukrashenie-oblozhki.jpg)
Glue the inscription to the cover.
![making a textile passport cover](https://i.washerhouse.com/images/6/2373-delaem-tekstilnuyu-oblozhku-na-pasport.jpg)
![making a textile passport cover](https://i.washerhouse.com/images/6/2374-delaem-tekstilnuyu-oblozhku-na-pasport.jpg)
Your DIY textile passport cover is ready.
![making a textile passport cover](https://i.washerhouse.com/images/6/2375-delaem-tekstilnuyu-oblozhku-na-pasport.jpg)