Soldering station diagram:
![Simple soldering station](https://i.washerhouse.com/_nw/10/973-11.jpg)
We will need:
1. Dimer. (any one will do). It is also called a dimmer.
2. Diode bridge.
3. Body. (wooden or plastic box). It is best to buy a ready-made housing from an electrician.
4. Socket.
5. Plug with wire.
Let's start with the dimer. Since the dimer body is very large, I recommend disassembling it, leaving only the circuit itself. The handle can be replaced, as in my case, you can leave the original one.
![](https://i.washerhouse.com/_nw/10/973-3.jpg)
![](https://i.washerhouse.com/_nw/10/973-4.jpg)
![](https://i.washerhouse.com/_nw/10/973-1.jpg)
![](https://i.washerhouse.com/_nw/10/973-2.jpg)
As a case, I decided to take a box from a Soviet switch.Since there was no lid, I made my own from plywood.
![](https://i.washerhouse.com/_nw/10/973-5.jpg)
Now you need to assemble everything according to the diagram. Install the socket and plug.
![](https://i.washerhouse.com/_nw/10/973-6.jpg)
![](https://i.washerhouse.com/_nw/10/973-7.jpg)
For beauty, I recommend painting the product.
![](https://i.washerhouse.com/_nw/10/973-8.jpg)
![](https://i.washerhouse.com/_nw/10/973-9.jpg)
Here's the final result.
![](https://i.washerhouse.com/_nw/10/973-10.jpg)
I WISH YOU SUCCESS!!!