But there is a way out and it is very simple, although additional parts and mechanisms will be required.
Aligning the thick wire
So, you need to find a log, a piece about half a meter in length. In it, closer to one of the edges, we drill a through hole with a diameter larger than the wire itself.
Next, insert the end of the wire into this hole.
![How to straighten thick wire without effort](https://i.washerhouse.com/uploads/posts/2020-02/1580734644_1-0-00-21-174.jpg)
The other end of the log must be wrapped with a cable and secured with a tie.
![How to straighten thick wire without effort](https://i.washerhouse.com/uploads/posts/2020-02/1580734627_1-0-00-24-952.jpg)
The second end of the cable must be attached to a reliable support, such as a concrete pillar. And at the end of the wire, put an ear clamp with a plate in which there are two holes. We bend the wire and insert the snake into these holes.
![How to straighten thick wire without effort](https://i.washerhouse.com/uploads/posts/2020-02/1580734688_1-0-00-56-334.jpg)
Next, this clamp is placed on the car's towbar.
![How to straighten thick wire without effort](https://i.washerhouse.com/uploads/posts/2020-02/1580734645_1-0-01-23-070.jpg)
And now, using a machine, we pull the wire through the hole in the log at an angle.
![How to straighten thick wire without effort](https://i.washerhouse.com/uploads/posts/2020-02/1580734671_1-0-01-29-322.jpg)
As a result of these actions, the wire will be perfectly straight.
![How to straighten thick wire without effort](https://i.washerhouse.com/uploads/posts/2020-02/1580734650_1-0-01-37-845.jpg)
Watch the video
Be sure to watch the short video to clearly see the whole process.