![2 useful homemade products from a plastic canister](https://i.washerhouse.com/uploads/posts/2020-01/1579864939_2-0-00-10-372.jpg)
Many liquids, such as engine oil, glass washer and primer, are sold in plastic cans, which are then sent to a landfill or used to store gasoline, industrial water, etc. However, the benefits of canisters do not end there, because they can be used to make useful devices for the home.
Toolbox
To make a tool storage box you will need:
- canister with double neck;
- furniture hinges – 2 pcs.;
- clips for pipes 20 mm – from 10 pcs.;
- M4-M6 screws with nuts and washers.
The canister needs to be marked along the seam for cutting. Furniture hinges are applied along a line to its bottom and their mounting holes are marked, then they are drilled.
![2 useful homemade products from a plastic canister](https://i.washerhouse.com/uploads/posts/2020-01/1579865009_2-0-00-36-566.jpg)
Using a grinder or jigsaw, cut the canister in half along the markings. The edges obtained from the cuts are polished, and the prepared halves are connected with loops. They are fastened with screws, nuts and washers.
![2 useful homemade products from a plastic canister](https://i.washerhouse.com/uploads/posts/2020-01/1579864997_2-0-01-45-066.jpg)
In this form, the canister turns into a case, to close which you need to screw on both lids.
![2 useful homemade products from a plastic canister](https://i.washerhouse.com/uploads/posts/2020-01/1579865006_2-0-03-10-866.jpg)
Next, random holes are drilled in both halves, and pipe clips are screwed through them.
![2 useful homemade products from a plastic canister](https://i.washerhouse.com/uploads/posts/2020-01/1579864933_2-0-04-05-800.jpg)
Clips are used as holders for screwdrivers, pliers, files and other tools. Thanks to this, when carrying it in a canister case, nothing will rattle.
![2 useful homemade products from a plastic canister](https://i.washerhouse.com/uploads/posts/2020-01/1579864940_2-0-04-54-200.jpg)
Extension cord reel
Also, the canister body can be used as a protective casing with a reel for storing an electrical extension cord. To make such a device you will need:
- canister;
- sewer pipes 50 mm and 75 mm;
- plug for pipe 50 mm;
- narrow mounting angle;
- a ready-made extension cord or just a separate cable, plug and socket.
![2 useful homemade products from a plastic canister](https://i.washerhouse.com/uploads/posts/2020-01/1579864925_2-0-05-45-533.jpg)
In the sides of the canister, 2 holes are made opposite for a 50 mm pipe.
![2 useful homemade products from a plastic canister](https://i.washerhouse.com/uploads/posts/2020-01/1579864953_2-0-06-33-490.jpg)
After this, the tube is cut 3 cm longer than the distance between the holes. On one side it needs to be extended with a bell. To do this, you can glue a narrow section of 75 mm pipe with hot glue. In this case, it must first be sawn across in order to narrow it to a diameter of 68 mm.
![2 useful homemade products from a plastic canister](https://i.washerhouse.com/uploads/posts/2020-01/1579864958_2-0-06-42-166.jpg)
A small hole is drilled in the center of the tube. You also need to drill the lid of the canister. Then the extension cable is inserted through the cover with the socket removed. Its end must be passed through the hole in the tube and brought out to the socket.
![2 useful homemade products from a plastic canister](https://i.washerhouse.com/uploads/posts/2020-01/1579864930_2-0-06-47-866.jpg)
![2 useful homemade products from a plastic canister](https://i.washerhouse.com/uploads/posts/2020-01/1579864969_2-0-06-52-866.jpg)
A socket is connected to the laid wire. Next, it is installed in the socket as in a socket box, since it has the same mounting diameter.
![2 useful homemade products from a plastic canister](https://i.washerhouse.com/uploads/posts/2020-01/1579864968_2-0-07-00-000.jpg)
![2 useful homemade products from a plastic canister](https://i.washerhouse.com/uploads/posts/2020-01/1579864995_2-0-07-09-066.jpg)
![2 useful homemade products from a plastic canister](https://i.washerhouse.com/uploads/posts/2020-01/1579864985_2-0-07-24-367.jpg)
![2 useful homemade products from a plastic canister](https://i.washerhouse.com/uploads/posts/2020-01/1579864995_2-0-07-39-866.jpg)
On the second side of the tube, a wide plug is installed on the glue. Any pear-shaped object of suitable size, preferably made of plastic, can serve as it. Then a knob is screwed to the plug. It can be bent from a narrow mounting angle or a steel strip.
![2 useful homemade products from a plastic canister](https://i.washerhouse.com/uploads/posts/2020-01/1579864998_2-0-08-15-000.jpg)
![2 useful homemade products from a plastic canister](https://i.washerhouse.com/uploads/posts/2020-01/1579864926_2-0-08-46-025.jpg)
![2 useful homemade products from a plastic canister](https://i.washerhouse.com/uploads/posts/2020-01/1579864937_2-0-08-55-000.jpg)
Thus, by rotating the knob you can retract the extension cable. If you pull the plug coming out of the canister lid, the wire will be pulled out, on the contrary.
![2 useful homemade products from a plastic canister](https://i.washerhouse.com/uploads/posts/2020-01/1579864965_2-0-09-16-766.jpg)
![2 useful homemade products from a plastic canister](https://i.washerhouse.com/uploads/posts/2020-01/1579865013_2-0-09-26-226.jpg)