![How to make a funnel skirt at the end of a PVC pipe](https://i.washerhouse.com/uploads/posts/2019-08/1565608743_1.jpg)
Will need
- The plastic pipe itself.
- Construction hairdryer.
- Wooden stand - rectangular plank.
- Metal bowl for molding. You can find similar utensils in the kitchen. Not necessarily stainless steel as in this example, but definitely metal.
How to make a skirt at the end of a PVC pipe
We place the cup on a wooden base - this way it will not transfer heat to other objects. We turn on the hair dryer. We take the pipe and begin to heat its end evenly around the circumference.
![How to make a funnel skirt at the end of a PVC pipe](https://i.washerhouse.com/uploads/posts/2019-08/1565608726_2.jpg)
Next, place it on the bowl and continue uniform heating of both the pipe and the bowl. We constantly rotate the pipe for greater uniformity of heating and apply a little pressure on it so that the plastic spreads across the mold.
![How to make a funnel skirt at the end of a PVC pipe](https://i.washerhouse.com/uploads/posts/2019-08/1565608769_3.jpg)
In order not to overdo it, let's lower the temperature of the hair dryer a little, since the main heating has already occurred. And we continue to warm up the end.
![How to make a funnel skirt at the end of a PVC pipe](https://i.washerhouse.com/uploads/posts/2019-08/1565608691_4.jpg)
As soon as the desired result is achieved, turn off the hair dryer, but do not remove the pipe from the bowl, let it cool.
![How to make a funnel skirt at the end of a PVC pipe](https://i.washerhouse.com/uploads/posts/2019-08/1565608743_5.jpg)
After cooling, you can remove it.
![How to make a funnel skirt at the end of a PVC pipe](https://i.washerhouse.com/uploads/posts/2019-08/1565608720_6.jpg)
Everything is quite simple and does not require any great effort or a lot of time.