![How to drill a hole in a tile with a regular drill bit](https://i.washerhouse.com/uploads/posts/2018-06/1529216774_12.jpg)
Let's imagine that you are faced with the task of hanging a toilet paper holder. The toilet is tiled, which makes the task much more difficult. What should I do to carefully drill a hole without breaking the tile? I will show you a way to do this simply, and even with an ordinary concrete drill.
Of course, the toilet paper holder is just an example. Using this method you can hang anything: a shelf, a mirror, a towel holder, etc.
How to drill a hole in ceramic tiles with a regular drill bit
Without a doubt, if you have a special drill for glass and tiles, then of course it is better to drill with it. I don’t have such a tool, due to the fact that I don’t often do repair work. A story from the household category.
Therefore, all I have is a set of concrete drills.
So let's get started. We try it on to the place where the holder will be for further installation. We glue pieces of electrical tape or masking tape to the drilling sites.
![How to drill holes in ceramic tiles](https://i.washerhouse.com/uploads/posts/2018-06/1529216744_11.jpg)
Now we mark the exact places for drilling. All I need to do is make four holes.
![How to drill a hole in a tile with a regular drill bit](https://i.washerhouse.com/uploads/posts/2018-06/1529216824_1.jpg)
We do everything exactly.
![How to drill a hole in a tile with a regular drill bit](https://i.washerhouse.com/uploads/posts/2018-06/1529216791_2.jpg)
Applying electrical tape is not only for marking. It prevents microcracks from spreading during drilling and protects the tile from breaking.
![How to drill a hole in a tile with a regular drill bit](https://i.washerhouse.com/uploads/posts/2018-06/1529216748_3.jpg)
Now the most important operation. We take a concrete drill and place it on the mark. With gentle blows of the hammer, we begin to hit the drill, periodically turning the drill by hand. Time per hole is approximately one minute. As a result, a small groove should appear in the tile.
![How to drill a hole in a tile with a regular drill bit](https://i.washerhouse.com/uploads/posts/2018-06/1529216785_4.jpg)
Everything needs to be done carefully, without haste. As a result, we perform the actions for all four holes.
![How to drill holes in ceramic tiles](https://i.washerhouse.com/uploads/posts/2018-06/1529216769_5.jpg)
The electrical tape can now be removed. We take a screwdriver and clamp the drill in the chuck.
![How to drill holes in ceramic tiles](https://i.washerhouse.com/uploads/posts/2018-06/1529216819_6.jpg)
At low speeds, drill a hole in both the tile and the wall to the desired depth.
![How to drill holes in ceramic tiles](https://i.washerhouse.com/uploads/posts/2018-06/1529216831_7.jpg)
We install plastic dowels.
![How to drill holes in ceramic tiles](https://i.washerhouse.com/uploads/posts/2018-06/1529216807_8.jpg)
For all four holes.
![How to drill holes in ceramic tiles](https://i.washerhouse.com/uploads/posts/2018-06/1529216799_9.jpg)
Now we screw the fastenings of the holder.
![How to drill holes in ceramic tiles](https://i.washerhouse.com/uploads/posts/2018-06/1529216808_10.jpg)
We hang the holder itself.
![How to drill holes in ceramic tiles](https://i.washerhouse.com/uploads/posts/2018-06/1529216744_11.jpg)
That's all!
![How to drill a hole in a tile with a regular drill bit](https://i.washerhouse.com/uploads/posts/2018-06/1529216774_12.jpg)
There is nothing complicated here, so there is no need to be afraid. The main thing is not to rush and everything will work out for you! Good luck!