![Simple wall lighting lamp](https://i.washerhouse.com/uploads/posts/2017-10/1508318496_1.jpg)
This wall lamp provides smooth and even illumination. This is achieved by the fact that light is reflected from external obstacles and scattered. If desired, such a unique lamp can be assembled in about 30 minutes, having everything at hand, of course.
This wall light consists of just two C-shaped aluminum profiles. And an LED strip with a power supply.
- I bought the aluminum profile at a hardware store.
- And I ordered the LED strip in China - aliexpress
- The power supply was ordered in China - aliexpress
Also, if you are going to repeat my lamp, then you will also need epoxy resin glue.
So, let's begin. I chose the wall above the sofa. I took measurements and decided on the long backlight. The shape of the lamp was chosen arbitrarily. I decided to place the profile rulers at a short distance so that I could simply hang the lamp on two hooks sticking out on the sides of the wall, which were left over from the previous owners.
![Simple wall lighting lamp](https://i.washerhouse.com/uploads/posts/2017-10/1508318531_3.jpg)
![Simple wall lighting lamp](https://i.washerhouse.com/uploads/posts/2017-10/1508318554_4.jpg)
I decided to saw off several small parts of the profile and use them to ensure this distance. I diluted epoxy glue, spread it on the sides to be fastened and secured it, leaving it to dry.
![Simple wall lighting lamp](https://i.washerhouse.com/uploads/posts/2017-10/1508318560_5.jpg)
![Simple wall lighting lamp](https://i.washerhouse.com/uploads/posts/2017-10/1508318587_6.jpg)
![Simple wall lighting lamp](https://i.washerhouse.com/uploads/posts/2017-10/1508318503_8.jpg)
This was my first experience using epoxy based glue and it was quite unsuccessful. It would be better if I took small screws and nuts...
Okay, I glued the profiles together. But when it came to gluing the LED strip, everything went wrong. As a result, I drilled a hole on the back side and inserted wooden caps that would hold the ribbon.
![Simple wall lighting lamp](https://i.washerhouse.com/uploads/posts/2017-10/1508318579_2.jpg)
![Simple wall lighting lamp](https://i.washerhouse.com/uploads/posts/2017-10/1508318589_7.jpg)
![Simple wall lighting lamp](https://i.washerhouse.com/uploads/posts/2017-10/1508318584_9.jpg)
After completing the assembly, I hung the lamp and hid the wire behind the curtain.
In this design, I took the tape in a protective insulated casing. But you can also use a regular one, since a low-voltage 12 V power supply is used, and there is galvanic voltage isolation in the power source.
You can also use an RGB LED strip with a remote control and turn on any color of lighting depending on your mood.
![Simple wall lighting lamp](https://i.washerhouse.com/uploads/posts/2017-10/1508318496_1.jpg)
Original article in English