For production we will need:
1) A can of paint or antistatic agent.
2) Nipple from a bicycle tube.
3) Essential oil or favorite perfume.
4) Water.
First of all, we remove the labels from the spray can and thoroughly rinse it to remove any remaining paint.
![DIY aerosol freshener](https://i.washerhouse.com/images/20/1413-aerozolnyy-osvezhitel-svoimi-rukami.jpg)
After this, we mark and drill a hole for the nipple, it is best, of course, to drill it in the bottom, but then the air freshener will not stand, so I drill it from the side.
![DIY aerosol freshener](https://i.washerhouse.com/images/20/1414-aerozolnyy-osvezhitel-svoimi-rukami.jpg)
Then we cut off the nipple itself from the tire and clean it to clean brass. Be careful you don't cut yourself.
![DIY aerosol freshener](https://i.washerhouse.com/images/20/1415-aerozolnyy-osvezhitel-svoimi-rukami.jpg)
![DIY aerosol freshener](https://i.washerhouse.com/images/20/1416-aerozolnyy-osvezhitel-svoimi-rukami.jpg)
Inserting it into the hole, solder it. You can, of course, glue it, but it is very important that this connection is airtight and maintains high pressure.
![DIY aerosol freshener](https://i.washerhouse.com/images/20/1417-aerozolnyy-osvezhitel-svoimi-rukami.jpg)
Important! Before soldering, you need to unscrew the valve itself with the spring from the nipple, because leaving it there it will melt and will no longer perform its function.
![DIY aerosol freshener](https://i.washerhouse.com/images/20/1418-aerozolnyy-osvezhitel-svoimi-rukami.jpg)
While soldering, ask someone close to you to help you, since doing it alone is very inconvenient and hot.
![DIY aerosol freshener](https://i.washerhouse.com/images/20/1419-aerozolnyy-osvezhitel-svoimi-rukami.jpg)
Having printed the inscription on thick paper, we glue it to the jar, I glued it with tape, but you can also use glue.
![DIY aerosol freshener](https://i.washerhouse.com/images/20/1420-aerozolnyy-osvezhitel-svoimi-rukami.jpg)
And so, finally, we begin to make the liquid itself. Take water, your favorite essential oil, and a syringe. Next, I mixed water and mint drops, poured it all into a syringe and filled our freshener.
![DIY aerosol freshener](https://i.washerhouse.com/images/20/1421-aerozolnyy-osvezhitel-svoimi-rukami.jpg)
![DIY aerosol freshener](https://i.washerhouse.com/images/20/1422-aerozolnyy-osvezhitel-svoimi-rukami.jpg)
Well, that’s all, the huge advantage of this freshener is that it is refillable, and you can take on new smells every time. When pumping, I do not recommend pumping too much pressure, because in this case the liquid will flow in a stream and not spray.
![DIY aerosol freshener](https://i.washerhouse.com/images/20/1423-aerozolnyy-osvezhitel-svoimi-rukami.jpg)