Where do they get them? Rowan grows on trees, but what about seeds and lard? Good people pour them into feeders. Tell me how to make the simplest one?
Dear, I promised that in the evening we would definitely make such a craft. Here's the story:
1. We will need: two empty, well-washed juice packs (1 liter), scissors, a stapler and a piece of strong twine, wire, in a word, whatever is at hand and is not a pity. In my case, these are leather laces.
![bird feeders](https://i.washerhouse.com/images/14/1376-kormushka-dlya-ptic.jpg)
2. One of the boxes will be the “bottom” of the feeder, the other will be the “roof”.
Preparing the “bottom”. Cut a rectangular hole in one of the large walls of the box. The distance from the long side should be at least 1 cm so that the birds have room to stay. We place the second box (“roof”) on its side and cut its sides in the middle in the following sequence: long side, short side, then long side again. This is what we end up with:
![bird feeders](https://i.washerhouse.com/images/14/1377-kormushka-dlya-ptic.jpg)
If the boxes are of different sizes, you can cut out the bottom side of the “roof”, as seen in the photo:
![bird feeders](https://i.washerhouse.com/images/14/1378-kormushka-dlya-ptic.jpg)
3. We fasten the boxes in four places using a stapler. If you don’t have it at hand, you can use wire or thread.
![bird feeders](https://i.washerhouse.com/images/14/1379-kormushka-dlya-ptic.jpg)
4. Finishing touches. Drainage - or four holes in the “bottom” of the feeder (we make them from the inside). Fasteners - or four holes along the edges in the upper rectangle of the “roof”.
![bird feeders](https://i.washerhouse.com/images/14/1380-kormushka-dlya-ptic.jpg)
Result!
![bird feeders](https://i.washerhouse.com/images/14/1381-kormushka-dlya-ptic.jpg)
This feeder is especially attractive to tits. Therefore, the child and I buy lard and go out early every morning to feed the hungry birds. To my surprise and joy, we manage without scandals. Almost...