![Long earrings in vamp style](https://i.washerhouse.com/images/14/1071-dlinnye-sergi-v-stile-vamp.jpg)
We will need:
![Long earrings in vamp style](https://i.washerhouse.com/images/14/1072-dlinnye-sergi-v-stile-vamp.jpg)
- round pliers,
- side cutters, which are also called wire cutters,
- ruler,
- a black chain at least 1 meter long,
- silver earrings with a hole,
- two connecting rings,
- two pins, or pins in another way, with a loop at the end,
- two silver caps,
- four black beads in the form of a disk,
- Manufacturing method.
1. Take a black chain, a ruler and wire cutters.
The chosen black color matches the vamp's image, but it can be replaced with any other color that is more suitable for your outfit. However, then the style of the earrings may be different.
![Long earrings in vamp style](https://i.washerhouse.com/images/14/1073-dlinnye-sergi-v-stile-vamp.jpg)
We measure out equal sections of the chain 5 cm long and bite them off with wire cutters. There should be 18 pieces, 9 for each earring.
![Long earrings in vamp style](https://i.washerhouse.com/images/14/1074-dlinnye-sergi-v-stile-vamp.jpg)
2. Take pieces of chains, round nose pliers and connecting rings. Using pliers, open the connecting ring, moving its ends away from each other to the side.
![Long earrings in vamp style](https://i.washerhouse.com/images/14/1075-dlinnye-sergi-v-stile-vamp.jpg)
Repeat the procedure with the other ring.
3. We put pieces of chains on the connecting rings, 9 pieces for each ring.
![Long earrings in vamp style](https://i.washerhouse.com/images/14/1076-dlinnye-sergi-v-stile-vamp.jpg)
4. Place the pin loop onto the connecting ring.
![Long earrings in vamp style](https://i.washerhouse.com/images/14/1077-dlinnye-sergi-v-stile-vamp.jpg)
Using pliers or your hands, close the ring.
![Long earrings in vamp style](https://i.washerhouse.com/images/14/1078-dlinnye-sergi-v-stile-vamp.jpg)
5. Take the cap and put it on the pin.
![Long earrings in vamp style](https://i.washerhouse.com/images/14/1079-dlinnye-sergi-v-stile-vamp.jpg)
6. We put two black beads in the form of disks on the pin.
![Long earrings in vamp style](https://i.washerhouse.com/images/14/1080-dlinnye-sergi-v-stile-vamp.jpg)
7. If necessary, cut the pin with wire cutters to the required length. If the pin is small in size, leave its length unchanged. Using pliers, we create an open loop in the form of a hook at the end of the pin. We select a wire with a hole.
![Long earrings in vamp style](https://i.washerhouse.com/images/14/1081-dlinnye-sergi-v-stile-vamp.jpg)
8. We thread the hook of the pin into the hole of the hook. We close the hook with pliers and get ready-made earrings.
![Long earrings in vamp style](https://i.washerhouse.com/images/14/1082-dlinnye-sergi-v-stile-vamp.jpg)
So, the earrings are ready, making them was not difficult and quite quick. Now you can try them on and keep them. And be sure that no one will come to a holiday or to work wearing exactly the same earrings as you. Or give them, knowing that no one will be able to give exactly the same gift.