Materials for work:
• Cord (for example, from an old vacuum cleaner) with a working plug at one end – 1 pc.;
• Suspension socket for lamp – 1 pc.;
• Empty polyurethane foam container – 1 pc.;
• Chandelier body with horn (without shade) – 1 pc.;
• Short bolt – 3 pcs.;
• Nut – 3 pcs.;
• Drill, thin drill, screwdriver.
Stages of work:
First stage: connect the wires.
We free the old chandelier from the shade.
![Lamp carrying](https://i.washerhouse.com/images/14/606-lampa-perenoska.jpg)
We find a wire from an unused household appliance (in the presented version, a cord from a vacuum cleaner is used). It is desirable: a longer wire, with a double insulating layer, so that it has a working plug at one end.
![Lamp carrying](https://i.washerhouse.com/images/14/607-lampa-perenoska.jpg)
Unscrew the horn from the body.We thread the cord into it so that the direction of movement goes towards the connection of the horn with the lampshade.
![Lamp carrying](https://i.washerhouse.com/images/14/608-lampa-perenoska.jpg)
Second stage: connect the wires. We are looking for a pendant socket for a lamp.
![Lamp carrying](https://i.washerhouse.com/images/14/609-lampa-perenoska.jpg)
We disassemble it into its components: disconnect the body and threaded sleeve, take out the porcelain liner.
![Lamp carrying](https://i.washerhouse.com/images/14/610-lampa-perenoska.jpg)
We free the end of the cord pulled out from the horn from the outer insulation, and strip the wires themselves (by cutting and removing the inner insulating layer from both wires).
![Lamp carrying](https://i.washerhouse.com/images/14/611-lampa-perenoska.jpg)
![Lamp carrying](https://i.washerhouse.com/images/14/612-lampa-perenoska.jpg)
We thread the stripped wires into the chandelier body.
![Lamp carrying](https://i.washerhouse.com/images/14/613-lampa-perenoska.jpg)
Further work is carried out inside the chandelier body. First we insert the wires into the cartridge body.
![Lamp carrying](https://i.washerhouse.com/images/14/614-lampa-perenoska.jpg)
We secure it with a special nut, which secures the chandelier horn to the body.
![Lamp carrying](https://i.washerhouse.com/images/14/615-lampa-perenoska.jpg)
![Lamp carrying](https://i.washerhouse.com/images/14/616-lampa-perenoska.jpg)
Next step: connecting the wires to the porcelain socket insert.
![Lamp carrying](https://i.washerhouse.com/images/14/617-lampa-perenoska.jpg)
To do this, twist a loop at the end of each wire.
![Lamp carrying](https://i.washerhouse.com/images/14/618-lampa-perenoska.jpg)
Unscrew the contact screws on the porcelain insert. We thread the screw into the loop. We put the screw in place and screw it tightly to the insert (the wiring ring remains under the screw, on the insert).
![Lamp carrying](https://i.washerhouse.com/images/14/619-lampa-perenoska.jpg)
After screwing the contact screws, we place the porcelain insert into the cartridge body (wires inside).
![Lamp carrying](https://i.washerhouse.com/images/14/620-lampa-perenoska.jpg)
![Lamp carrying](https://i.washerhouse.com/images/14/621-lampa-perenoska.jpg)
We connect the cartridge body with the threaded sleeve.
![Lamp carrying](https://i.washerhouse.com/images/14/622-lampa-perenoska.jpg)
Third stage: making a reflector.
To concentrate the direction of light, we make a “curtain” - a reflector, by cutting out a spade-shaped part from an empty container of polyurethane foam.
![Lamp carrying](https://i.washerhouse.com/images/14/623-lampa-perenoska.jpg)
![Lamp carrying](https://i.washerhouse.com/images/14/624-lampa-perenoska.jpg)
![Lamp carrying](https://i.washerhouse.com/images/14/625-lampa-perenoska.jpg)
We drill holes at one end of the reflector with a thin drill, trying to align them with the holes on the body of the chandelier - where the lampshade is attached to it (in the presented version there are three holes - in the center and edges).
![Lamp carrying](https://i.washerhouse.com/images/14/626-lampa-perenoska.jpg)
Using short bolts we twist the reflector with the chandelier body.
![Lamp carrying](https://i.washerhouse.com/images/14/627-lampa-perenoska.jpg)
From the inside of the chandelier body, we secure each bolt with a nut of suitable size.
![Lamp carrying](https://i.washerhouse.com/images/14/628-lampa-perenoska.jpg)
![Lamp carrying](https://i.washerhouse.com/images/14/629-lampa-perenoska.jpg)
We screw the incandescent lamp into the carrying case.
![Lamp carrying](https://i.washerhouse.com/images/14/630-lampa-perenoska.jpg)
![Lamp carrying](https://i.washerhouse.com/images/14/631-lampa-perenoska.jpg)
That's all.We check the functionality of the homemade carrier and begin its immediate operation.