![Brooch frill](https://i.washerhouse.com/images/11/358-brosh-zhabo.jpg)
To create such a frill brooch you will need:
- a ribbon 0.7 cm wide, light green in color.
- blank for a brooch.
- glue gun.
- green satin ribbon 2 cm wide.
- scissors.
Description of work.
Cut three long strips from light green ribbon to create the base of the brooch. All segments must reach 16 cm.
![cut out three long strips](https://i.washerhouse.com/images/11/359-vyrezaem-tri-dlinnye-poloski.jpg)
Then we take each tape separately and glue the edges together, aligning them in the middle of the part. We also glue all three segments together.
![glue the edges together](https://i.washerhouse.com/images/11/360-skleivaem-vmeste-kraya.jpg)
We receive such blanks. Now we collect a bow from them, placing one on top of the other, crossing them in the center.
![We receive such blanks](https://i.washerhouse.com/images/11/361-poluchaem-takie-zagotovki.jpg)
We put the resulting part aside and begin to create blanks for the main bow. We prepare 6 identical pieces of green tape, each 8.5 cm long. Then carefully singe the cuts on all the pieces. And using a glue gun we connect the two edges of each piece together, creating loops from them.
![blanks for bow](https://i.washerhouse.com/images/11/362-zagotovki-dlya-banta.jpg)
Now we attach these parts on top of the light green bow, aligning them, but retreating 2-3 mm from the edges.
![attach on top](https://i.washerhouse.com/images/11/363-prikreplyaem-poverh.jpg)
We attach the loops on the second side of the bow in the same way.
![attach the loops](https://i.washerhouse.com/images/11/364-prisoedinyaem-petelki.jpg)
We get this double bow. Next, cut out two strips of light green ribbon, each 5 cm long.
![eyelets](https://i.washerhouse.com/images/11/365-petelki.jpg)
We singe their sections and glue them together into two loops. Then we attach these parts to the prepared bow, but placing them strictly diagonally and along the center.
![double bow](https://i.washerhouse.com/images/11/366-dvoynoy-bant.jpg)
We put the created bow aside and prepare a voluminous tail for it. To do this, cut 4 pieces 7 cm long from the green ribbon and burn the edges. We form loops from the three, and leave the last strip as a straight piece. Then we cut 10 strips from a light green ribbon, each 6 cm long. We also singe all the existing sections and glue them into a loop shape.
Now we place a piece of green ribbon vertically, it will serve as the basis for the tail of the brooch and glue 3 light green loops on the lower cut, folding them like a fan.
![Brooch frill](https://i.washerhouse.com/images/11/367-brosh-zhabo.jpg)
Next, we attach one green loop along the base strip. We take two light loops and cover with them the place where the previous part was glued, directing them in different directions.
![Brooch frill](https://i.washerhouse.com/images/11/368-brosh-zhabo.jpg)
It remains to gradually attach the last two green blanks, covering their sections with details from light green ribbons.
![Brooch frill](https://i.washerhouse.com/images/11/369-brosh-zhabo.jpg)
Then we complete the created row of green blanks with an attached loop of light green ribbon.
![Brooch frill](https://i.washerhouse.com/images/11/370-brosh-zhabo.jpg)
We get this tail for the brooch. We attach the previously set aside double bow to it. And in the center of the bow we glue a button wrapped in ribbon.
![Brooch frill](https://i.washerhouse.com/images/11/371-brosh-zhabo.jpg)
We unfold the part with the wrong side up and glue the steel brooch blank.
![Brooch frill](https://i.washerhouse.com/images/11/372-brosh-zhabo.jpg)
The frill brooch is ready!