So let's get started!
We will need:
-30 cm of chiffon fabric in each color (pink, white and grey),
-sewing threads (white, gray pink, shades of gray and pink),
-paper towels,
- silver lurex threads,
- sewing machine,
- pincushion,
-scissors,
-Crochet hook,
-pins,
- tailor's chalks.
Progress
1. Unroll the paper towel along the length of the desired scarf. If there is not enough width, then unwind the same amount along the length and fasten the edges with needles. This is the basis. You can use non-woven fabric if you don’t want paper towels, but non-woven fabric is many times more expensive and less soluble in water, and it’s also harder to find, because you need a special water-soluble non-woven fabric for fabrics. Namely, because of its good solubility in water and budget, I chose it and recommend it to you.
2. On the chiffon we draw droplets in the form of a peacock feather, 8-10 cm long, and cut out these pieces. Out of 30 cm of each color, about 30 - 25 pieces should come out. There should be about 90 drops in total.
3. Pin the droplets with needles over the entire area of the desired scarf or baste it onto the base with thread. I basted it on towels. It's convenient for anyone. It must be said that the droplets need to be distributed evenly over the entire surface and make sure that there is not too much of one color nearby or that the droplets are dense in some places and thin in others.
4. Use a sewing machine to sew lines from one drop to another across the entire scarf, first in one color - pink. This work is long, but the result is worth it. By machine stitching, be sure to go to the droplet, as shown in the Photo, otherwise the whole product will fall apart in pieces after washing, because the droplets will not be sewn together. Then use other colors - gray, pink and white.
Do this over the entire area of the scarf.
5. You can stitch the “veins” of the droplets with lurex, or you can simply stitch along the area of the scarf.
6. Soak the whole thing in warm water without powder and gently wash it so that the paper dissolves. Remove the paper from the scarf.
7. Then dry and iron.
8. We look - there is no paper, only the “cobweb” remains.
9. To make the scarf look neat, we’ll crochet the edges, but you can just carefully hem them. I tied the edge of the scarf with threads, which I used to stitch the space between the droplets. I connected several colors into one thread and first tied regular air loops around the edge. grabbing the edges of the scarf. This way you just get a neat edge. Next, I tied a scarf with double crochets for beauty. It turned out great!
The end result is a scarf like this.
Next are wearing options and a demonstration of the product itself.
I would like to say that people around me did not understand how I made this scarf. I had to explain it to everyone. Many immediately wanted the same one, but in a different color.
Creative success!
Author - Bodrova Elizaveta Sergeevna.