![You will need the following](https://i.washerhouse.com/images/6/1245-potrebuetsya-sleduyuschee.jpg)
Right now we will consider a detailed master class on making soap at home.
You will need the following:
* White soap base made in England, we will need about 50 grams;
* Transparent soap base, manufacturer England, take 150 grams;
* Two water-soluble pictures with Disney princesses;
* Two molds for soap: one silicone in the shape of a chrysanthemum, and the second transparent plastic in the shape of a petal;
* Glass glass;
* Fragrance with raspberry aroma;
* Red pigment dye in liquid form;
* Stearic acid;
* Alcohol;
* Scissors;
* Sticks and a little vegetable oil;
*Microwave or water bath.
![You will need the following](https://i.washerhouse.com/images/6/1246-potrebuetsya-sleduyuschee.jpg)
The yield of the finished soap is approximately 75 grams from a silicone mold and 100 grams from a plastic one. First, we need to fill the bottom thin layer of a transparent base so that the picture can be clearly seen.
We take the transparent base and cut about 45 grams from it, cut it into approximately equal small pieces and place it in a glass glass.
![Take a transparent base](https://i.washerhouse.com/images/6/1228-berem-osnovu-prozrachnuyu.jpg)
We put the glass in the microwave and melt it at low power for about 40-50 seconds, but do not bring it to a boil. Or you can melt the contents in a water bath. While we are melting the base, wipe the molds with a clean, dry cloth and lubricate them well with refined vegetable oil. We take out the glass, the base is completely melted, add a couple of drops of alcohol to eliminate bubbles.
![put in a glass glass](https://i.washerhouse.com/images/6/1229-vykladyvaem-v-steklyannyy-stakan.jpg)
![melt](https://i.washerhouse.com/images/6/1230-plavim.jpg)
Add a couple more drops of raspberry flavor. Pour the liquid base into both molds in a thin layer, about 2 mm. Give it a little time to harden, about 15 minutes.
![add a couple drops of alcohol](https://i.washerhouse.com/images/6/1231-dobavim-paru-kapel-spirta.jpg)
![Pour out the liquid foundation](https://i.washerhouse.com/images/6/1232-vylivaem-zhidkuyu-osnovu.jpg)
We take the pictures and cut out the fragments we need.
![We take pictures](https://i.washerhouse.com/images/6/1233-berem-kartinki.jpg)
![Preparing the second white layer](https://i.washerhouse.com/images/6/1234-gotovim-vtoroy-belyy-sloy.jpg)
Preparing the second white layer. We cut the white base into pieces and put it in a glass. We also melt until a liquid homogeneous mass.
![white layer](https://i.washerhouse.com/images/6/1235-belyy-sloy.jpg)
![cut into pieces](https://i.washerhouse.com/images/6/1236-rezhem-na-kusochki.jpg)
The first layer has frozen. We take the pictures and place them face down. Spray with alcohol to smooth.
![put the picture down](https://i.washerhouse.com/images/6/1237-kladem-kartinkoy-vniz.jpg)
![Spray with alcohol to smooth](https://i.washerhouse.com/images/6/1238-bryzgaem-dlya-razglazhivaniya-spirtom.jpg)
On top of the picture, fill both forms with a 2-3 mm layer of white liquid soap. Give another 15 minutes until it hardens.
![Spray with alcohol to smooth](https://i.washerhouse.com/images/6/1238-bryzgaem-dlya-razglazhivaniya-spirtom.jpg)
![put it in a glass](https://i.washerhouse.com/images/6/1239-vykladyvaem-ee-v-stakan.jpg)
All that remains is to make the third red layer. We melt the remaining transparent mass and add 4-5 drops of dye, a pinch of stearic acid and 2-3 drops of flavoring. Fill both forms and let them harden.
![white liquid soap, both forms](https://i.washerhouse.com/images/6/1240-belym-zhidkim-mylom-obe-formy.jpg)
![make a third red layer](https://i.washerhouse.com/images/6/1241-sdelat-tretiy-krasnyy-sloy.jpg)
![make a third red layer](https://i.washerhouse.com/images/6/1242-sdelat-tretiy-krasnyy-sloy.jpg)
After an hour, the soap is ready.We take the soap out of the mold and it is ready for use.
![DIY handmade soap](https://i.washerhouse.com/images/6/1243-mylo-ruchnoy-raboty-svoimi-rukami.jpg)
![the soap is ready](https://i.washerhouse.com/images/6/1244-mylo-gotovo.jpg)