![Complex two-story flower](https://i.washerhouse.com/images/4/1434-slozhnyy-dvuhetazhnyy-cvetok.jpg)
Like? Then prepare everything you need:
![prepare everything you need](https://i.washerhouse.com/images/4/1417-podgotovte-vse-neobhodimoe.jpg)
- satin ribbon in dark colors 5 x 5 cm - 9 pieces.
- light-colored satin ribbon 5 x 5 cm – 9 pieces.
- glue,
- lighter,
- cardboard in the form of a circle.
You also need a decorative bead. First of all, let's prepare the petals for the flower. To do this, fold a square of each color in half, and you will get these double triangles.
![double triangles](https://i.washerhouse.com/images/4/1418-dvoynye-treugolniki.jpg)
Place one triangle on top of the other. If you want a dark flower, then put the light one on the dark one, and if the flower is meant to be light, then vice versa. Leave a little space between them so that they are at different levels.
![one triangle to another](https://i.washerhouse.com/images/4/1419-odin-treugolnik-na-drugoy.jpg)
Then fold in half to create a smaller triangle. Fold it like this, if you want it dark, then the light one should be on top, if it’s light, then the dark one should be on top.
![fold in half](https://i.washerhouse.com/images/4/1420-slozhite-popolam.jpg)
Next, you need to bring two sides of different colors down, holding everything with your finger.
![holding everything with your finger](https://i.washerhouse.com/images/4/1421-priderzhivaya-vse-palcem.jpg)
Do the same with the other side.
![Trim the end](https://i.washerhouse.com/images/4/1435-obrezhte-konec.jpg)
Trim the end and use fire to connect all the layers. Do this very carefully so that everything sticks well and the layers do not separate.
![with the other side](https://i.washerhouse.com/images/4/1422-so-vtoroy-storonoy.jpg)
Trim the back part a little and also set it on fire. This method makes the petal very tall, and due to this the flower turns out tall and voluminous.
![connect all layers](https://i.washerhouse.com/images/4/1423-soedinite-vse-sloi.jpg)
The first petal is ready.
Do all 9 petals in the same way. Here they are.
![petal is ready](https://i.washerhouse.com/images/4/1424-lepestok-gotov.jpg)
A flower needs a base. Take a circle of cardboard and cover it with tape on both sides.
![flower base](https://i.washerhouse.com/images/4/1425-osnova-cvetka.jpg)
![flower base](https://i.washerhouse.com/images/4/1426-osnova-cvetka.jpg)
Glue 6 petals together to create the bottom floor of the flower.
![Glue 6 petals together](https://i.washerhouse.com/images/4/1427-prikleyte-mezhdu-soboy-6-lepestkov.jpg)
Glue the three petals together with the lower corners.
![Three petals](https://i.washerhouse.com/images/4/1428-tri-lepestka.jpg)
Both floors are ready.
![Both floors are ready](https://i.washerhouse.com/images/4/1429-oba-etazha-gotovy.jpg)
Glue the first floor onto cardboard covered with tape. And on it, glue three finished petals so that each petal is between the two lower ones.
![Glue the first floor onto cardboard](https://i.washerhouse.com/images/4/1430-prikleyte-pervyy-etazh-na-kartonku.jpg)
Place any bead that matches the color in the middle, and the flower is ready.
![bead according to color](https://i.washerhouse.com/images/4/1431-po-cvetu-businku.jpg)
That's all, as you can see, everything is done quickly. Practice on some scrap fabric to build up your hand, and you can safely get to work. A little patience and you will definitely succeed.
![everything is done quickly](https://i.washerhouse.com/images/4/1432-delaetsya-vse-bystro.jpg)
![headband for girls](https://i.washerhouse.com/images/4/1433-obodochek-dlya-devochki.jpg)
You can decorate a headband for a girl with this flower, or make a finished picture from several flowers. It all depends on your imagination. Thank you all for your attention.
![Complex two-story flower](https://i.washerhouse.com/images/4/1434-slozhnyy-dvuhetazhnyy-cvetok.jpg)