![materials for the case](https://i.washerhouse.com/images/4/1044-maetrialy-dlya-chehla.jpg)
The pattern was designed using FrontDesigner 3.0. To do this, I measured the length, width and height of the camera and added 0.5 cm on each side for the seam. I also decided to make a pocket for spare batteries.
![draw a pattern](https://i.washerhouse.com/images/4/1045-chertim-vykroyku.jpg)
I printed out the pattern and glued it together.
![print it out](https://i.washerhouse.com/images/4/1046-raspechatyvaem.jpg)
![cut out](https://i.washerhouse.com/images/4/1047-vyrezaem.jpg)
To check the correctness of the pattern design, I sewed a mock-up of the cover from thick fabric.
![sewed a mock-up of the cover](https://i.washerhouse.com/images/4/1048-sshil-maket-chehla.jpg)
![check for correctness](https://i.washerhouse.com/images/4/1049-proverit-pravilnost.jpg)
Next, I glued the pattern to the wrong side of the fabric, traced it with a marker and cut it out.
![pasted the pattern](https://i.washerhouse.com/images/4/1050-nakleil-vykroyku.jpg)
![lined with marker and cut out](https://i.washerhouse.com/images/4/1051-obvl-markerom-i-vyrezal.jpg)
Let's start making a pocket for batteries. We make markings, cut out the corners and flap and sew the corners together using a sewing machine.
![pocket for batteries](https://i.washerhouse.com/images/4/1052-karmashka-dlya-akkumulyatorov.jpg)
![cut out the corners and flap](https://i.washerhouse.com/images/4/1053-vyrezaem-ugolki-i-klapan.jpg)
![Marking the place](https://i.washerhouse.com/images/4/1054-razmechaem-mesto.jpg)
We mark the place where the pocket will be located and sew it on.
![there is a pocket](https://i.washerhouse.com/images/4/1055-raspolagatsya-karmashek.jpg)
![sew on the pocket](https://i.washerhouse.com/images/4/1056-prishivaem-karmashek.jpg)
![stitch the cover valve](https://i.washerhouse.com/images/4/1057-prostrachivaem-klapan-chehla.jpg)
Next, we sew the cover flap from the wrong side and turn it inside out.
![stitch the cover valve](https://i.washerhouse.com/images/4/1058-prostrachivaem-klapan-chehla.jpg)
![turn it inside out](https://i.washerhouse.com/images/4/1059-vyvorachivaem.jpg)
We cut out the padding polyester, coat the workpiece with Moment glue and glue the padding polyester to the workpiece.
![Cutting out the padding polyester](https://i.washerhouse.com/images/4/1060-raskraivaem-sintepon.jpg)
![coat the workpiece with glue](https://i.washerhouse.com/images/4/1061-promazyvaem-zagotovku-kleem.jpg)
![glue the padding polyester to the workpiece](https://i.washerhouse.com/images/4/1062-prikleivaem-sintepon-k-zagotovke.jpg)
We coat the edges of the workpiece with glue and glue our “sandwich”.
![coat with glue and glue](https://i.washerhouse.com/images/4/1063-promazyvaem-kleem-i-skleivaem.jpg)
![coat with glue and glue](https://i.washerhouse.com/images/4/1064-promazyvaem-kleem-i-skleivaem.jpg)
All that remains is to sew both sides on the sewing machine. We do this from the wrong side. To prevent the pocket flap from getting in the way, we glue it with tape.
![stitch both sides](https://i.washerhouse.com/images/4/1065-prostrochit-obe-storony.jpg)
![sew on a sewing machine](https://i.washerhouse.com/images/4/1066-prostrochit-na-shveynoy-mashinke.jpg)
![glue it with tape](https://i.washerhouse.com/images/4/1067-prikleivaem-ego-skotchem.jpg)
Turn the cover right side out and sew Velcro onto the flaps.
![Turn the cover inside out](https://i.washerhouse.com/images/4/1068-vyvorachivaem-chehol.jpg)
![sew Velcro onto the valves](https://i.washerhouse.com/images/4/1069-prishivaem-na-klapany-lipuchki.jpg)
The camera case is ready.
![Case for the camera](https://i.washerhouse.com/images/4/1070-chehol-dlya-fotoapparata.jpg)
![DIY camera case](https://i.washerhouse.com/images/4/1071-chehol-dlya-fotoapparata-svoimi-rukami.jpg)