![ice access](https://i.washerhouse.com/images/3/1029-ledostupy.jpg)
For this we need:
- An inner tube from a bicycle (it’s better to take a car one, as it is stronger and wider than a bicycle one), but unfortunately I didn’t have one at hand.
- We will also need small bolts with nuts (preferably they are all the same size), their number is not particularly important. Bolts from Soviet iron construction kit work very well.
I took 5 pieces for each ice access.
And so let's get started - first, let's cut the camera lengthwise (from a bicycle or car) and cut it into this shape.
![ice access sketch](https://i.washerhouse.com/images/3/1028-eskiz-ledostupov.jpg)
![ice access material](https://i.washerhouse.com/images/3/1030-material-dlya-ledostupov.jpg)
We secure the bolts in the wide part by screwing them onto the nuts.
![screw in the bolts and nuts](https://i.washerhouse.com/images/3/1031-vvinchivaem-bolty-i-gayki.jpg)
For the process of putting them on, as well as a more detailed manufacturing process, watch the video: