![Christmas tree made of corrugated paper](https://i.washerhouse.com/images/2/96-elka-iz-gofrirovannoy-bumagi.jpg)
1. Materials and tools for the Christmas tree:
• Thick paper.
• Corrugated paper.
• Threads with a needle.
• Scissors.
• Thermal gun.
![Materials and tools](https://i.washerhouse.com/images/2/97-materialy-i-instrumenty.jpg)
2. For decoration:
• Beads.
• Sequins.
![For decoration](https://i.washerhouse.com/images/2/98-dlya-ukrasheniya.jpg)
3. Cut out this shape from thick paper.
![Cut from thick paper](https://i.washerhouse.com/images/2/99-vyrezaem-iz-plotnoy-bumagi.jpg)
4. We connect it into a cone, which will be the base of our Christmas tree.
![Connect it into a cone](https://i.washerhouse.com/images/2/100-soedinyaem-ee-v-konus.jpg)
5. Cut a strip of lilac paper about 5 cm wide. The length of this strip should be about 2-3 times the circumference of the cone. We begin to stitch it along the edge with a needle and thread.
![Let's start stitching the paper](https://i.washerhouse.com/images/2/101-nachinaem-proshivat-bumagu.jpg)
6. It turns out like this ruffle. The first blank for our Christmas tree made of corrugated paper.
![It turns out to be a ruffle](https://i.washerhouse.com/images/2/102-poluchaetsya-ryusha.jpg)
7. Make the lower edge of the workpiece with a light wave. To do this, simply stretch the paper slightly with your fingers. We reduce each subsequent workpiece in length. And we also reduce the last three ruffles in width.
![make it a light wave](https://i.washerhouse.com/images/2/103-delaem-legkoy-volnoy.jpg)
8. Apply glue, moving 4 cm from the edge of the cone.
![Apply glue](https://i.washerhouse.com/images/2/104-nanosim-kley.jpg)
9. Glue the bottom frill first.
![glue the bottom frill](https://i.washerhouse.com/images/2/105-prikleivaem-nizhnyuyu-oborku.jpg)
10.Apply glue higher for the second row of ruffles.
![Apply glue higher](https://i.washerhouse.com/images/2/106-nanosim-kley-povyshe.jpg)
11. Glue the second blank. In the same way we cover the entire Christmas tree with corrugated paper.
![Glue the second piece](https://i.washerhouse.com/images/2/107-prikleivaem-vtoruyu-zagotovku.jpg)
12. Apply glue to the top of the head.
![Dropping glue](https://i.washerhouse.com/images/2/108-kapaem-kley.jpg)
13. We put on the final frill on top.
![Dress on top](https://i.washerhouse.com/images/2/109-odevaem-sverhu.jpg)
14. Decorate with sequins and beads. A cute Christmas tree made of corrugated paper is ready.
![Decorate with sequins and beads](https://i.washerhouse.com/images/2/110-ukrashaem-payetkami-i-businkami.jpg)