Metal crafts. Page 11
Master classes:
![How to make a welding clamp for any welding angle How to make a welding clamp for any welding angle](https://i.washerhouse.com/uploads/posts/2021-01/thumbs/1611652441_kak-sdelat-svarochnuju-strubcinu-pod-ljuboj-ugol-svarki-0-11-34-893.jpg)
How to make a welding clamp for any welding angle
To quickly and evenly weld pipes, rods and other rolled metal at an angle, it is very convenient to use a special clamp. It holds parts stronger than magnets, and is also capable of being adjusted to different joining angles. It's really
![How to make any bend on a pipe without a pipe bender How to make any bend on a pipe without a pipe bender](https://i.washerhouse.com/uploads/posts/2021-01/thumbs/1611391755_kak-sdelat-na-trube-ljuboj-izgib-bez-trubogiba-0-02-42-133.jpg)
How to make any bend on a pipe without a pipe bender
Sometimes you have to bend pipes for a pipeline or various metal structures. Having only a grinder and a welding machine, this can be done without a pipe bender. The process is not fast, but it works 100%.
![How to make a simple vice for a drilling machine without welding How to make a simple vice for a drilling machine without welding](https://i.washerhouse.com/uploads/posts/2021-01/thumbs/1611052013_delaem-prostye-nadezhnye-tiski-dlja-sverlilnogo-stanka-bez-svarki-0-26-12-600.jpg)
How to make a simple vice for a drilling machine without welding
In order to accurately drill parts, not only the absence of runout on the drilling machine and the perpendicularity of the drill are important, but also the reliable fixation of the workpieces. For this purpose, a specially designed vice is used. You can make such a tool with your own hands.
![How to make a bearing puller from blind holes from a bolt How to make a bearing puller from blind holes from a bolt](https://i.washerhouse.com/uploads/posts/2021-01/thumbs/1611041421_kak-sdelat-semnik-podshipnika-s-gluhih-otverstij-svoimi-rukami-0-00-27-337.jpg)
How to make a bearing puller from blind holes from a bolt
Without a special puller, removing a bearing from a blind hole without damaging it and the seat itself is very difficult. If such a tool is not available, it can be made from available materials lying around in any garage. We offer
![How to make a lightweight, razor-sharp kitchen knife that doesn't require sharpening How to make a lightweight, razor-sharp kitchen knife that doesn't require sharpening](https://i.washerhouse.com/uploads/posts/2021-01/thumbs/1610971724_samodelnyj-kuhonnyj-britvenno-ostryj-nozh-kotoryj-ne-nuzhno-zatachivat-0-06-34-332.jpg)
How to make a lightweight, razor-sharp kitchen knife that doesn't require sharpening
For cutting soft tomatoes, meat and other foods, it is better to use a very sharp knife. However, sharpening it takes a lot of time. In order not to constantly have to edit the knife, you can equip it with replaceable blades, replacing which takes a minute.
![How to make a jar opener with screw caps How to make a jar opener with screw caps](https://i.washerhouse.com/uploads/posts/2021-01/thumbs/1610967408_kak-sdelat-otkryvalku-dlja-banok-s-vintovymi-kryshkami-0-04-25-000.jpg)
How to make a jar opener with screw caps
You often come across jars with Euro lids that are difficult to open with your hands. In this case, you have to use every possible means to get to the contents. Having made such an opener, you will be able to cope with even the tightest lid in 2 seconds.
![The simplest compact wire clamp The simplest compact wire clamp](https://i.washerhouse.com/uploads/posts/2021-01/thumbs/1610103120_samyj-prostoj-kompaktnyj-homutatel-pod-provoloku-0-02-32-034.jpg)
The simplest compact wire clamp
To install wire clamps, it is convenient to use a clamp. This device allows them to be tightened securely, which is important, for example, if you need to connect a high-pressure hose to a fitting. Making a clamp is very simple, you literally need
![How to make a compass for milling any holes with a screwdriver How to make a compass for milling any holes with a screwdriver](https://i.washerhouse.com/uploads/posts/2021-01/thumbs/1610041092_kak-sdelat-prisposoblenie-dlja-vyrezanija-ljubyh-krugov-iz-fanery-shurupovertom.jpg)
How to make a compass for milling any holes with a screwdriver
It is impossible to make a large, perfectly even hole in sheet material with a jigsaw or grinder. To do this you need a special tool, which is easy to make with your own hands. Combined with a drill, it is capable of cutting round holes in plywood,
![An unusual way to make a perfect right-angle bend in a round pipe without a pipe bender An unusual way to make a perfect right-angle bend in a round pipe without a pipe bender](https://i.washerhouse.com/uploads/posts/2021-01/thumbs/1610007847_kak-sdelat-idealnyj-izgib-krugloj-tolstostennoj-truby-pod-prjamym-uglom-bez-trubogiba-0-07-08-617.jpg)
An unusual way to make a perfect right-angle bend in a round pipe without a pipe bender
It is impossible to bend a large-diameter thick-walled pipe with a manual pipe bender. This is done in another accessible way. It is suitable in cases where the pipe will not be used for a gas pipeline or water supply, but only as a power structure.
![How to make a bearing puller from old valves How to make a bearing puller from old valves](https://i.washerhouse.com/uploads/posts/2021-01/thumbs/1609781354_kak-sdelat-semnik-dlja-podshipnikov-iz-staryh-klapanov-0-05-19-065.jpg)
How to make a bearing puller from old valves
It can be extremely difficult to knock out pressed-in bearings without a special puller. If you do not plan to buy such a tool, then it can be made from scrap materials. With it, the bearings are removed in a matter of minutes.
![How to make a miter saw with a broach for an angle grinder from bicycle bushings How to make a miter saw with a broach for an angle grinder from bicycle bushings](https://i.washerhouse.com/uploads/posts/2020-12/thumbs/1608881540_1.jpg)
How to make a miter saw with a broach for an angle grinder from bicycle bushings
For quick and accurate cutting of metal workpieces, it is convenient to use a miter saw with a broach. Since this is not a cheap tool, you can simply make a special stand for installing an angle grinder on it. Such a device is practically
![How to make an electric grill spit from a windshield wiper motor How to make an electric grill spit from a windshield wiper motor](https://i.washerhouse.com/uploads/posts/2020-12/thumbs/1608879717_1.jpg)
How to make an electric grill spit from a windshield wiper motor
To grill a whole carcass on the grill, you need to turn it often or even continuously. This way nothing will burn and it definitely won’t remain raw on one side. In order not to twirl a skewer near a hot grill, you can make an electric spit.
![How to make an original screwdriver from Soviet coins How to make an original screwdriver from Soviet coins](https://i.washerhouse.com/uploads/posts/2020-12/thumbs/1608619847_foto1.jpg)
How to make an original screwdriver from Soviet coins
This idea came to my mind completely by accident, but not without reason. The child urgently needed to disassemble the toy to replace the batteries. I rushed to the closet, but the screwdriver was not there. I found a bit for a screwdriver.I took a screwdriver, but the battery was dead....
![How to make a pump from an old car strut How to make a pump from an old car strut](https://i.washerhouse.com/uploads/posts/2020-12/thumbs/1608448102_1608448118.jpg)
How to make a pump from an old car strut
The front shock absorber strut remaining after the suspension repair can be converted into a hand pump for inflating tires. This is a simple, indestructible tool, yet quite compact to carry with you in a backpack. The main thing is that its production is almost
![Successful DIY clamp design Successful DIY clamp design](https://i.washerhouse.com/uploads/posts/2020-12/thumbs/1608290599_1.jpg)
Successful DIY clamp design
A clamp is used to tighten hoses on fittings, attach fencing mesh and perform other tasks. It can be used to tighten the wire clamp very tightly. There are many variations in the manufacture of this instrument, but few
![How to make a charcoal grill from a small gas cylinder How to make a charcoal grill from a small gas cylinder](https://i.washerhouse.com/uploads/posts/2020-12/thumbs/1608196318_1.jpg)
How to make a charcoal grill from a small gas cylinder
To cook shawarma, the meat must be fried with constant turning. Usually a purchased electric apparatus is used for this, but the aroma of meat fried in it is inferior to that cooked on coals. To pamper family and friends
![How to make a small gas heater for a tent How to make a small gas heater for a tent](https://i.washerhouse.com/uploads/posts/2020-12/thumbs/1607866225_1.jpg)
How to make a small gas heater for a tent
When winter fishing or hiking, the use of a heating source is required. A lot of portable devices have been invented for this, but not all of them are convenient or light enough. We offer a heat exchanger design for a tourist gas stove,
![How to make a marking compass from trash in just 10 minutes How to make a marking compass from trash in just 10 minutes](https://i.washerhouse.com/uploads/posts/2020-12/thumbs/1607756532_1.jpg)
How to make a marking compass from trash in just 10 minutes
To draw circles on workpieces, as well as quickly transfer dimensions, you can make a simple marking compass from scrap materials.If you have a welding machine and emery in the garage, it will take no more than 10 minutes to assemble the homemade product. This
![How to make a simple garage stove from a gas cylinder How to make a simple garage stove from a gas cylinder](https://i.washerhouse.com/uploads/posts/2020-12/thumbs/1607583244_1.jpg)
How to make a simple garage stove from a gas cylinder
Stoves such as potbelly stoves are ideal for heating a garage, shed or other technical room. Unfortunately, they are made of very thin metal, so their walls quickly burn through. It’s cheaper, easier and more reliable to weld the stove with your own
![How to make a conductor for quick welding from a brake pad and a gas lift How to make a conductor for quick welding from a brake pad and a gas lift](https://i.washerhouse.com/uploads/posts/2020-12/thumbs/1606800274_1.jpg)
How to make a conductor for quick welding from a brake pad and a gas lift
If you have to make a lot of corner parts from pipes, angles and other rolled metal, then it would be a good idea to use this jig. It will not only allow you to maintain 90°, but also eliminate distortion along other planes.
![How to make a grill from a gas cylinder for a fuel briquette How to make a grill from a gas cylinder for a fuel briquette](https://i.washerhouse.com/uploads/posts/2020-12/thumbs/1606798797_1-0-11-28-533.jpg)
How to make a grill from a gas cylinder for a fuel briquette
A barbecue using fuel briquettes is more profitable in comparison with a classic coal one. It gives off a lot of heat, is easier to light and burns for a long time, so you can fully warm up next to it. Let's look at how you can make a very convenient compact
![How to make a stove for working in a garage in just 1 hour How to make a stove for working in a garage in just 1 hour](https://i.washerhouse.com/uploads/posts/2020-11/thumbs/1606631885_1.jpg)
How to make a stove for working in a garage in just 1 hour
To heat your garage cheaply, you can make a stove that runs on waste. It will really help out if you have to service your car in winter. With it in the garage it will be warm, almost like in the house.
![How to make a vibrating sieve with a washing machine motor to sift out sand How to make a vibrating sieve with a washing machine motor to sift out sand](https://i.washerhouse.com/uploads/posts/2020-11/thumbs/1606310543_1.jpg)
How to make a vibrating sieve with a washing machine motor to sift out sand
When making reinforced concrete products, it is very important to use screenings or sand of the same fraction, so it must be re-screened to remove large inclusions.The easiest and fastest way to do this is on a vibrating sieve, which can be done
![How to make a simple jigsaw from a refrigerator compressor How to make a simple jigsaw from a refrigerator compressor](https://i.washerhouse.com/uploads/posts/2020-11/thumbs/1606286619_1-0-00-00-366.jpg)
How to make a simple jigsaw from a refrigerator compressor
The compressor from the refrigerator can be used as a drive for a jigsaw. For this, it is ideally suited, as it requires minimal modifications.
How to securely install a fence post
Crafts from plastic pipes | Page 5 | Do it yourself
DIY Christmas wreath made from natural materials