DIY amplifier. Page 2
Master classes:
![Powerful converter for powering the subwoofer from the on-board 12 volt network Powerful converter for powering the subwoofer from the on-board 12 volt network](https://i.washerhouse.com/midi-images/0/midi-648-22.jpg)
Powerful converter for powering the subwoofer from the on-board 12 volt network
Perhaps the most difficult part of amplifier design is powering the subwoofer channel from the on-board 12 volt network. There are a lot of reviews about it in various forums, but it’s very difficult to make a really good converter using the advice of experts, check this out
![Simple sound amplifier Simple sound amplifier](https://i.washerhouse.com/midi-images/0/midi-646-6.jpg)
Simple sound amplifier
We make a simple sound amplifier with our own hands. We will need the following: 1) Coil: L1 5 μH 2) Resistors: R1, R3 2.2 kOhm; R2,R5 22kOhm; R4 680 Ohm; R6 2.2 Ohm; R7 10 Ohm. 3) Capacitors: C1, C4- 4.7 uF-25V; S3-22 uF-25V; S3-22 uF-25V; C5-0.47
![Amplifier 4x22 W Amplifier 4x22 W](https://i.washerhouse.com/midi-images/0/midi-549-15.jpg)
Amplifier 4x22 W
Surely many would like to have a 5.1 audio system at home, but the prices for such amplifiers are often quite high. I’ll tell you how simple and not very expensive it is to assemble a 4-channel amplifier for such a system. After searching the Internet I chose
![Amplifier 2x35W. Amplifier 2x35W.](https://i.washerhouse.com/midi-images/0/midi-32703744.jpg)
Amplifier 2x35W.
The amplifier is assembled on a TDA7262 chip, the power in stereo version is 35 Watt, and in mono version it is 80 Watt.
![We assemble a subwoofer with our own hands! We assemble a subwoofer with our own hands!](https://i.washerhouse.com/midi-images/0/midi-34582453.jpg)
We assemble a subwoofer with our own hands!
A DIY subwoofer is much cheaper and of better quality than Chinese models. And much more beautiful. . .
How to make a 12 V mini electric stove
Decoupage knife holder | Do it yourself
Garden planter in the form of a stump | Do it yourself