Was the plastic handle on the bucket too weak and fell off after a few days of use? No problem! Making a new pen yourself takes a couple of minutes of free time. Two holes are drilled in the bucket and screws are inserted into these holes.
They will attach a new handle, which can easily be made from a piece of plastic hose. Moreover, the hose can be of different thicknesses. The thicker it is, the more comfortable it is to hold. And the fastening nut can be easily hidden inside the hose.
Piezo lighter with flashlight. The gas in it was used a long time ago, but the flashlight keeps working and working. Where to use it? By screwing the flashlight with tape to the glasses, we get LED backlighting. Useful in a dark garage or closet.
Plastic food container with lid. For example, from cookies. Such a convenient box, and it’s such a shame to throw it away. Well, you can use it as an organizer for various little things. For fastening, for example.
Many useful things can be made from steel strip. The following tools will be useful: a grinder with a cutting wheel, emery cloth, and a drill. It is enough to carefully and accurately mark the future part on the metal and cut off the excess.
This is how a useful belt buckle-clip appears on the household.
To manufacture a more complex device, in addition to the steel strip, you will also need bearings. Having cut out the part, secured the bearings in it and made a longitudinal cut in the steel rectangular profile, we get a beam for moving loads.
The handle of a paint roller can be used to easily open beer bottles. I never would have guessed it!
A hacksaw blade for metal can easily be turned into a kind of caliper. It is enough to cut the canvas on both sides at an acute angle, fasten it with a screw through the holes in the edges and you are welcome. The measuring device is ready.
A necessary item made from a steel washer. You will need another link from the motor chain. Drill the washer and cut off the edge with a grinder. Connect the chain link to the two halves of the washer using a rivet. Place the finished structure on the cable. We got a universal hanger for different things.
A regular tape measure is tightly attached to a segment knife. Without any modifications. And working with such a combined tool has become more convenient. The possibilities of use have expanded.
A one and a half liter plastic bottle will make a jar for hardware if you cut it correctly with a knife.
The following tricky method will help you securely secure the end of a metal cable. The hollow rivet tube is not simply flattened at the end. And in addition, all this is inserted into a screw drilled through and secured with a long connecting nut. Ugh. Is it necessary to fence such a garden?
If you attach a razor blade with a self-tapping screw to a wooden handle from an old paint brush, you will get a convenient cutter. However, not a cutter, but a cutter. Little one...
And again a flashlight in an old lighter. This time we will tape it to the screwdriver.And you can tighten screws in dark places.
On a jar with residual construction liquids (paints, varnishes) on the outside, you can mark the level of the residue. And in the future you don’t need to open the lid to find out how much paint is left.
A roll of steel wire wrapped with tape will not unwind.
